Sale!

Phân phối Bơm trục vít IMO chính hãng tại Việt Nam

$2,900.00 (Giá tham khảo)

CHAU THIEN CHI CO.,LTD Phân phối tất cả các dòng sản phẩm máy bơm Imo giá cạnh tranh, dịch vụ tốt nhất tại thị trường Việt Nam:

  • Bơm trục vít IMO
  • Bơm 3 trục vít IMO
  • Bơm bánh răng IMO
  • Bơm hàng hải IMO

 

IMO PUMP được thành lập vào năm 1931, được Circor mua lại vào năm 2017.  IMO PUMP là máy bơm nhiều trục vít đầu tiên trên thế giới.
Công ty TNHH Châu Thiên Chí chuyên cung cấp bơm IMO, bơm bánh răng, bơm trục vít, IMO Pump, IMO bơm.
Liên hệ ngay với chúng tôi để được hỗ trợ giá tốt nhất
Địa chỉ: 29/33 Đường Số 11, Phường 11, Quận Gò Vấp, Tp.HCM
Website: chauthienchi.com- Email: [email protected] – Hotline: 0909119181

Bơm 3 trục vít là loại máy bơm trục vít lớn nhất đang được sử dụng hiện nay.Chúng thường được sử dụng để bôi trơn máy móc thang máy thủy lực. Dịch vụ vận chuyển và đốt dầu nhiên liệu cung cấp năng lượng cho máy móc thủy lực. Bơm trục vít IMO ứng dụng hiệu quả cho ngành Mía đường – Bơm mật mía non
Bơm IMO 3E_F_-87(P)/95 Vỏ sắt hoặc thép gắn chân SDD17852
IMO Pump 3E_F-118(P) Hộp sắt gắn chân SDD19379
Bơm trục vít IMO 3E_FS-118(P) Vỏ thép gắn chân SDD18198
3-Screw Pump IMO 3E_F-143(J)/162 Vỏ sắt gắn chân SDD18020
IMO bơm 3E_FS-143(J)/162 Vỏ thép gắn chân SDD18103
IMO 3-Screw Pump 3E_F-187(Y/M)/200 Hộp sắt gắn chân SDD19398

Bơm IMO 4U series pump is intended primarily as a medium pressure fluid power pump. It is available foot or flange mounted and is suitable for cyclic pressure service
Bơm IMO Size: 137, 156, 187P, 187, 200, 218, 250.
IMO Series 4U/4T Specifications
IMO Casing- 4T: Cast alloy steel. 4U: High tensile, close grain cast iron
IMO Rotor Housing- Pearlitic gray iron
IMO Power Rotor- Alloy steel, hardened and thread ground.
IMO Idler Rotors- Alloy steel or pearlitic cast iron, hardened and thread ground.
IMO Gaskets- Cellulose and non-asbestos fiber.
IMO Seal & Bearing- Fluoroelastomer bellows mechanical seal with carbon on niresist faces and an external, permanently grease packed, deep groove ball bearing. Carbon on carbide seal faces available on 4T series.
IMO Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.
Outlet Pressure- 1500 PSIG (103.4 BAR) maximum. 2000 PSIG (138 BAR) under certain conditions. Consult Imo Pump. Minimum recommended differential pressure is 50 PSIG (3.4 BAR).
Inlet Pressure- 4T: 75 PSIG (5.2 BAR) maximum, sizes 137 & 156. All others, 50 PSIG (3.4 BAR) maximum. 4U: 50 PSIG (3.4 BAR) maximum.
Viscosity- 60 to 3000 SSU (10 to 650 CST). Hydraulic oils, lube oils, phosphate ester and water-glycol fire resistant fluids can be handled per standard pump ratings.
Temperature- 0 to 180°F (-18 to 82°C).
Drive- Direct only.
IMO Rotation- Clockwise facing pump shaft. Counterclockwise rotation optional.
IMO Mounting- May be foot or flange mounted in any attitude.
IMO Filtration- Inlet strainers are required to keep contaminants and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01 inch- 238micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are recommended.
IMO Connections- Inlets and outlets are SAE 4-bolt flange pads. Mating socket weld flanges are included with 4T series pumps but must be specified and purchased separately for 4U series pumps. All 4T inlet heads are rotatable in 90° increments. Series 4U inlet heads are rotatable in the following increments: Sizes 137 & 156: 60°. Sizes 187 & UP: 45°. SAE port pad bolt patterns are for 3000 PSI rated flanges except the 218/250 casing sizes use a 500 PSI pattern on the inlet and 187/200 outlet uses a 6000 PSI pattern. Maximum Speed*- Sizes 137 & 156: 4400 RPM. Sizes 187 & UP: 3600 RPM. Special pumps available to 8000 RPM with boosted inlet pressure. Consult Imo Pump.

Bơm IMO 3E_FS-187(Y/M)/200 Vỏ thép gắn chân SDD18505
IMO Pump 3E_C-87(P)/95 Vỏ sắt hoặc thép gắn mặt bích SDD19077
Bơm IMO  3E_C-118(P) Vỏ sắt gắn mặt bích SDD18268
3E_CS-118(P) Vỏ thép gắn mặt bích SDD18958
3E_C-143(J)/162 Vỏ sắt gắn mặt bích SDD18251
IMO Pump Công ty TNHH Châu Thiên Chí
3E_CS-143(J)/162 Vỏ thép gắn mặt bích SDD17990
IMO 3E-C-187(Y/M)/200 Vỏ sắt gắn mặt bích SDD19113
3E_CS-187(Y/M)/200 Vỏ thép gắn mặt bích SDD18280
3EIC(S)-87(P)/95 Vỏ bằng sắt hoặc thép gắn liền SDD19147
CIRCOR bơm3EIC-118(P) Vỏ sắt gắn liền SDD19924
3EICS-118(P) Vỏ thép gắn liền SDD19529
3EIC-143(J)/162 Vỏ sắt gắn liền SDD18778
Circor bơm 3EICS-143(J)/162 Vỏ thép gắn liền SDD19925
3EIC-187(Y/M)/200 Vỏ sắt gắn liền SDD19926
3EICS-187(Y/M)/200 Vỏ thép gắn liền SDD19927
Bơm IMO 3E-87/95 Chân gắn trên tấm đế Vỏ sắt thép SDD20066
3E-87/95 Mặt bích gắn vào động cơ mặt C Vỏ sắt và thép SDD20073

3E-118 Chân gắn trên tấm đế Hộp sắt SDD20067
Bơm IMO 3E-118 Mặt bích gắn vào động cơ mặt C Vỏ sắt SDD20074
3E-118 Chân gắn trên tấm đế Vỏ thép SDD20068
3E-118 Mặt bích gắn vào động cơ mặt C Vỏ thép SDD20075
Imo pump 3E-143/162 Chân gắn trên tấm đế Hộp sắt SDD20069
Bơm 3 trục vít IMO 3E-143/162 Mặt bích gắn vào động cơ mặt C Vỏ sắt SDD20076
3E-143/162 Chân gắn trên tấm đế Vỏ thép SDD20070
3E-143/162 Mặt bích gắn vào động cơ mặt C Vỏ thép SDD20077
IMO 3-Screw Pump 3E-187/200 Chân gắn trên tấm đế Hộp sắt SDD20071
3E-187/200 Mặt bích gắn vào động cơ mặt C Vỏ sắt SDD20078
IMO Pump 3E-187/200 Chân gắn trên tấm đế Vỏ thép SDD20072
Bơm IMO Công ty TNHH Châu Thiên Chí
3E-187/200 Mặt bích gắn vào động cơ mặt C Vỏ thép SDD20079
Bơm trục vít 3G Series
AA3G_095, vỏ sắt SDD19409
Imo gear pumpAA3G_118, vỏ sắt SDD19580
Circor bơm AA3G_143/162, vỏ sắt SDD19511
AA3G_095, vỏ thép SDD19643
Bơm IMO AA3G_118, vỏ thép SDD19644
AA3G_143/162, vỏ thép SDD19645

Bơm IMO Series 6U/6T pump is intended primarily as a high pressure fluid power pump. It is available foot or flange mounted and is suitable for cyclic pressure service (Nominal flow rate, GPM/LPM, at 2500 PSI (172 BAR), 200 SSU (43 CST)
Bơm IMO Size: 118*, 137, 156, 187P, 187, 200, 218, 250.
Series 6U/6T Specifications
IMO Casing- 6T: Cast alloy steel. 6U: High tensile, close grain cast iron
IMO Rotor Housing- Pearlitic gray iron
IMO Power Rotor- Alloy steel, hardened and thread ground.
IMO Idler Rotors- Alloy steel or Pearlitic cast iron, hardened and thread ground.
IMO Gaskets- Cellulose and non-asbestos fiber.
IMO Seal & Bearing- Fluoroelastomer bellows mechanical seal with carbon on niresist faces and an external, permanently grease packed, deep groove ball bearing. Carbon on carbide seal faces available on 6T series.
IMO Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.
Outlet Pressure- 2500 PSIG (172 BAR) maximum. 3000 PSIG (207 BAR) under certain conditions. Consult Imo Pump. Minimum recommended differential pressure is 50 PSIG (3.4 BAR).
Inlet Pressure- 6T: 75 PSIG (5.2 BAR) maximum, sizes 137 & 156. All others, 50 PSIG (3.4 BAR) maximum. 6U: 50 PSIG (3.4 BAR) maximum.
Viscosity- 60 to 3000 SSU (10 to 650 CST). Hydraulic oils, lube oils, phosphate ester and water-glycol fire resistant fluids can be handled per standard pump ratings.
IMO Temperature- 0 to 180°F (-18 to 82°C).
Drive- Direct only.
Rotation- Clockwise facing pump shaft. Counterclockwise rotation optional.
Mounting- May be foot or flange mounted in any attitude.
Filtration- Inlet strainers are required to keep contaminants and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01 inch- 238 micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are recommended

Bơm bánh răng Imo AA3G/NN__IA095, vỏ sắt SDD19705
Imo Pump AA3G/_N__IA095, vỏ sắt hoặc thép SDD19706
AA3G/NN__IA118, vỏ sắt SDD19713
3-Screw Pump công ty TNHH Châu Thiên Chí
AA3G/_NS__IA118, vỏ thép SDD19714
Bơm 3 trục vít IMO AA3G/NN__IA143/162, vỏ sắt SDD19719
Bơm 3 trục vít AA3G/_NS_IA143/162, vỏ thép SDD19720
AA3G/______187/200, vỏ sắt SDD19901
AA3G/__S___187/200, vỏ thép SDD19981
Bơm IMO AA3G/______250, vỏ sắt SDD19902
AA3g__S____250, vỏ thép SDD19982
Máy bơm dòng 3D – 3D Series
3D106 Vỏ sắt gắn mặt bích SDD20018
Bơm 3 trục vít 3D106 Hộp sắt gắn chân SDD18295
3D118 Vỏ sắt gắn mặt bích SDD19051
3-Screw Pump 3D118 Hộp sắt gắn chân SDD18243
3D137 Vỏ sắt gắn mặt bích SDD19052
3D137 Hộp sắt gắn chân  SDD19074
Bơm Imo 3D156 Vỏ sắt gắn mặt bích  SDD18533
3D156 Hộp sắt gắn chân SDD19075
Imo Pump 3D156 Vỏ thép gắn mặt bích SDD18969
3D156 Vỏ thép gắn chân  SDD18333
3D156 Vỏ thép gắn chân có đầu vào hướng trục SDD17752

Screw Pump Repair Kit IMO ACF 110L4 IRBP IMO
Screw Pump Repair Kit ACF100N4IMO G053 IMO
Screw Pump Repair Kit ACF125N4 IMO G053 IMO
Screw Pump Repair Kitа ACF90N4 IMO G053 IMO
Screw Pump Repair Kit IMO ACE 038N1 IVBP IMO
Pump Repair Kit Imo ACG 052x5xVxxG053 IMO CHAU THIEN CHI CO.,LTD Phân phối bơm bánh răng Imo giá tốt tại Việt Nam – Hotline: 0909.119.181 – E: [email protected]
Pump Repair Kit IMO ACF 110x4xRxxG053 IMO 

Bơm bánh răng IMO  3D187 Vỏ sắt gắn mặt bích SDD19053
IMO gear pumps 3D187 Hộp sắt gắn chân  SDD19080
3D187 Vỏ thép gắn mặt bích SDD19056
IMO 3-Series 3D187 Vỏ thép gắn chân  SDD18561
3D218  Vỏ sắt gắn mặt bích SDD19586
Bơm IMO 3D218 Hộp sắt gắn chân  SDD17974
3D218 Vỏ thép gắn mặt bích SDD19072
Circor Pump công ty TNHH Châu Thiên Chí
3D218Vỏ thép gắn chân  SDD17971
3D218 Vỏ thép gắn chân có đầu vào hướng trục SDD17745
3D250 Vỏ sắt gắn mặt bích SDD19587
Bơm hàng hải 3D250 Hộp sắt gắn chân SDD18939
3D250 Vỏ thép gắn mặt bích SDD19605
Navy/Marine Pumps 3D250 Vỏ thép gắn chân  SDD18558
Imo bơm bánh răng 3D275 Vỏ sắt gắn mặt bích  SDD19650
3D275 Hộp sắt gắn chân  SDD19617
Bơm IMO 3D275  Vỏ thép gắn mặt bích SDD19637
3D275 Vỏ thép gắn chân  SDD19541
Bơm bánh răng Imo 3D312  Vỏ sắt gắn mặt bích SDD18537
3D312 Hộp sắt gắn chân SDD18991
Gearpump Imo 3D312 Vỏ thép gắn mặt bích  SDD20057
3D312 Vỏ thép gắn chân SDD19108

3D337 & 3D350
Vỏ sắt gắn mặt bích SDD18946
3D337 & 3D350 Hộp sắt gắn chân SDD19095
3D337 & 3D350 Vỏ thép gắn mặt bích SDD19115
3D337 & 3D350 Vỏ thép gắn chân SDD18096
Bơm IMO 3D400 Vỏ sắt gắn mặt bích  SDD18942
3D400 Hộp sắt gắn chân SDD18771
3D400 Vỏ thép gắn mặt bích  SDD19085
3D400 Vỏ thép gắn chân  SDD18399
Bơm Imo 6D SERIES
Bơm IMO 6D106
Bơm Imo 6D118
Imo Pump 6D137
Bơm IMO 6D156
Bơm Circor 6D187
Bơm trục vít IMO 6D218
Bơm 3 trục vít 6D250
Công ty TNHH Châu Thiên Chí phân phối bơm bánh răng Imo giá tốt tại Việt Nam  – Hotline: 0909119181
Bơm IMO 6D275
Bơm hàng hải 6D312P
Bơm IMO 6D312
3-Screw Pump 6D350
Bơm IMO 6D400P
Circor Pump 6D400
Bơm Imo 4SFC
SERIES
Bơm IMO 4SFC0200R0200

Bơm Imo 4SFC0200R0300
Công ty TNHH Châu Thiên Chí IMO Pump, Website: chauthienchi.com- Email: [email protected] – Hotline: 0909119181
Imo Pump 4SFC0200R0400
4SFC0250R0380
Bơm 3 trục vít 4SFC0250R0500
3-Screw Pump 4SFC0250R0700
Bơm IMO 4VKC

Bơm IMO Series 12L pumps are designed for very high pressure service primarily for compressor gas sealing, fluid power and hydrostatic bearing applications. Pumps are equipped with a steel case and balanced mechanical shaft seal. This series is believed to be the world’s highest pressure capability 3-screw pump (Nominal flow rate, GPM/LPM, at 4500 PSI (276 BAR), 200 SSU (43 CST)
Bơm IMO Size: 118, 137, 156, 187P, 187, 200
IMO Series 12L Specifications
IMO Casing- Low alloy cast steel.
IMO Rotor Housing- Pearlitic gray iron.
IMO Power Rotor- Alloy steel, nitride hardened and thread ground.
IMO Idler Rotors- Ductile iron, hardened and thread ground.
IMO Gaskets- Fluoroelastomer o-rings with backup rings.
IMO Seal & Bearing- Balanced mechanical seal with stainless steel bellows, fluoroelastomer o-rings and carbon on carbide sealing faces. External, permanently grease packed, deep groove ball bearing.
IMO Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, ANSI RF spool pieces, etc.
Outlet Pressure- 4000 PSIG (276 BAR) maximum for size 118. 4500 PSIG (310 BAR) maximum for sizes 137 through 200. Minimum recommended differential pressure is 40 PSI (2.8 BAR). Consult Imo Pump for higher pressures.
Inlet Pressure- 200 PSIG (13.8 BAR) maximum. 250 PSIG (17.2 BAR) maximum for type N.
Viscosity- 45 to 3000 SSU (5 to 650 CST)
Temperature- 0 to 250°F (-18 to 121°C)
Drive- Direct only.
IMO Rotation- Clockwise facing pump shaft .
IMO Mounting- May be foot mounted in any orientation.
IMO Connections- Pumps have SAE 4-bolt socket weld flanges that are provided with the pump.
IMO Filtration- Inlet strainers are required to keep contaminants and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 25 micron or finer inlet filtration is recommended.
Maximum Speed*- 3600 RPM
Bơm IMO SERIES
Bơm bánh răng IMO 4VKC0320R690
Bơm trục vít IMO 4VKC0400R0560
Bơm 3 trục vít IMO 4VKC0400R0680
Bơm IMO 4VKC0400R0800
4VKC0475R0730
Gear Pump 4VKC0475R0950
3-Screw Pump Công ty TNHH Châu Thiên Chí, Website: chauthienchi.com- Email: [email protected] – Hotline: 0909119181
IMO bơm4VKC0550R0950
Bơm IMO 4VKC0550R1080
Bơm IMO 4VKC0600R1060
Bơm hàng hải 4VKC0600R1390
Bơm IMO 4VKC0700R1100
Bơm 3 trục vít 4VKC0700R1400
Bơm 3 trục vít USNP / 4PIC Series
Bơm IMO 20USNP38
Bơm IMO 20USNP46
Circor Pump 20USNP50
Bơm IMO 20USNP56
Bơm IMO 40USNP41
IMO Pump40USNP49
Bơm IMO 80USNP36
IMO bơm 80USNP42
Bơm trục vít IMO 80USNP46
Bơm IMO 4PIC-187AJ

Bơm IMO Series 413IC pump is designed for vertical, deep well submerged operation for unloading barges, small tankers or tanks. The pump discharge is axial along the shaft. The design incorporates a third idler rotor which suppresses vibration and noise when pump is lightly cavitated (Nominal flow rate, GPM/LPM, at 100 PSI (6.9 BAR), 200 SSU (43 CST)
Bơm IMO Size: 800JD800JD
IMO Rotor Housing- Bronze
IMO Power Rotor- Alloy steel, hardened.
IMO Idler Rotors- Alloy steel, hardened.
IMO Gaskets- None
IMO Bearing- Internal carbon graphite sleeve
IMO Outlet Pressure- 150 PSIG (10.3 BAR)
IMO Inlet Pressure- Static head to static lift.
IMO Viscosity- 33 to 20,000 SSU (2.0 to 4300 CST). Lower viscosity ranges require lower allowable differential pressures.
IMO Temperature- 0 to 300°F (-18 to 149°C).
IMO Drive- Direct only.
IMO Rotation- Counterclockwise facing pump shaft.
IMO Mounting- For vertical, deep well mounting.
IMO Filtration- Standard pump is equipped with an inlet strainer having 1/4 inch (6.4 MM) openings.
IMO Connections- Inlet is the screened end of the pump. Discharge is through openings in the shaft end of the pump.
Maximum Speed*- 1500 RPM

IMO bơm EMTEC pumps are designed to withstand the harsh environment of high pressure machine tool coolant service. Special hardening techniques produce wear resistance within the housing bores offering cost effective pumping (Performance shown at a viscosity of 1.8 centistokes, speed of 3500 RPM)
IMO bơm Size: 20-38, 20-46, 20-56, 40-46,80-36, 80-46, 140-39, 140-46, 210-40, 210-46, 280-43, 280-46, 440-40, 440-46
Emtec Series Specifications
IMO Casing- Cast iron inlet and discharge covers.
IMO Housing- Cast iron with laser hardened bores.
IMO Rotors- Nitride hardened alloy steel.
IMO Shaft Seal- Silicon carbide on silicon carbide, fluorocarbon fitted mechanical seal. Optionally, pumps can be supplied without shaft seal for vertical in-tank mounting. In this case, the seal chamber is drained overboard.
IMO Bearing- Permanently grease packed external ball bearing.
IMO O-Rings- Fluorocarbon.
Viscosity- 1.0 cSt minimum for differential pressure to 870 PSI (60 BAR). 1.8 cSt minimum for differential pressure to 1300 PSI (90 BAR.) 9000 SSU (2000 cSt) maximum.
IMO Inlet Pressure- 145 PSIG (10 BAR) maximum.
IMO Outlet Pressure- 1300 PSIG (90 BAR) maximum.
IMO Differential Pressure- Operation at differential pressures below 40 psi (2.8 BAR) may require pump modification to assure sufficient shaft seal cooling flow. Consult Imo Pump.
TIMO emperature- 0 to 210°F (-18 to 100°C)
IMO Drive/Rotation- Direct drive, clockwise rotation only facing pump shaft.
Speed- 3600 RPM maximum.
IMO Mounting- Shaft end flange mounting, horizontal or vertical, shaft up.
IMO Connections- SAE 4-bolt flange pads for use with 3000 PSI rated 4-bolt flanges, metric bolts.
IMO Filtration- A fine degree of filtration compatible with the expected type and quantity of contaminant will maximize pump service life.
Accessories- Completely mounted pump/driver assemblies with baseplates or NEMA ‘C” face motor adapters are available.

Công ty TNHH Châu Thiên Chí phân phối tại Việt Nam, Website: chauthienchi.com- Email: [email protected] – Hotline: 0909119181
Bơm IMO 4PIC-187Y
Bơm IMO4PIC-187P
Bơm trục vít IMO 4PIC-187M
Bơm IMO 4PIC-187
Bơm bánh răng IMO 4PIC-217Y
Bơm IMO 4PIC-217P
Bơm IMO 4PIC-217M
Bơm Circor 4PIC-217
Bơm IMO 4PIC-236G

Bơm IMO Tritec Series Pumps three screw pumps are designed for handling liquids with little or no lubricating properties, liquids that are corrosive or that contain abrasives.
Tritec Series Specifications
IMO Casing- Fabricated stainless steel or cast copper alloy.
IMO Rotor Housing-Proprietary metal ceramic composite lined stainless steel or copper alloy.
IMO Rotors-Proprietary sintered material for abrasion resistance or a proprietary stainless steel for corrosive service.
IMO O-Rings-As required, fluorocarbon typical.
IMO Shaft Seal-& Bearing- Mechanical seal of various styles; sealless magnetic drive also available. Ball bearing is permanently grease packed and external to the fluid pumped.
IMO Balance Bushing-Silicon carbide lined.
IMO Outlet Pressure-1160 PSIG (80 Bar) maximum.
IMO Inlet Pressure- 100 PSIG (7 Bar) maximum assuming suitable mechanical shaft seal.
IMO Differential Pressure- Operation at differential pressures below 40 psi (2.8 BAR) may require pump modification to assure sufficient shaft seal coling flow. Consult Imo Pump.
IMO Viscosity-0.30 CST minimum. Maximum dependent on shaft sealing system and available inlet pressure.
IMO Temperature-210°F (100°C) maximum dependent upon elastomers used. Higher temperatures on special application.
Speed-3600 RPM maximum.
IMO Drive-Direct only through flexible coupling or magnetic drive.
IMO Rotation-Clockwise only facing pump shaft.
IMO Mounting- Available in foot or flange mounting, horizontal or vertical.
IMO Accessories- Completely mounted pump/driver assemblies with baseplates, etc.
NOTE: Not all capabilities can be accommodated simultaneously. Consult Imo Pump with specific pump operating requirements

Bơm IMO 4PIC-236
Bơm 3 trục vít 4PIC-236AS
Bơm IMO 4PIC-276P
Bơm trục vít IMO 4PIC-276G
Bơm IMO 4PIC-276
Bơm IMO 12D SERIES
Bơm IMO 12D106
IMO gear pump 12D118

Bơm IMO Series 324A is a double suction design providing relatively high flow rates in a compact pump(Nominal flow rate, GPM/LPM, at 500 PSI (34.5 BAR), 200 SSU (43 CST)
Bơm IMO Size: 162, 187, 231, 250, 275, 300, 325, 350, 375, 412
Series C324 Specifications
IMO Casing- High tensile gray cast iron. Optional cast steel casing available. A 150 PSIG (10.3 BAR) steam/hot oil jacket available on steel cased pumps.
IMO Rotor Housing- Cast pearlitic gray iron.
IMO Power Rotor- Alloy steel, hardened and ground.
IMO Idler Rotors- Alloy steel, hardened and ground.
IMO Gaskets- Cellulose and non-asbestos fiber.
IMO Seal & Bearing- Type P: Alternate rows of hard and soft square molded packing rings, iron cased pumps. Type E: Alternate rows of hard and soft square molded packing rings, steel cased pumps, elevated temperatures. Type B: Buna N bellows mechanical seal with carbon on niresist faces. Recommended for light duty, clean lube and hydraulic oils. Type H: Positive drive mechanical seal with carbon on niresist faces. Recommended for residual and crude oils. Recommended for residual and crude oils. All types have one or two internal sleeve bearings.
IMO Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.
IMO Outlet Pressure- 500 PSIG (34.5 BAR) maximum. Minimum recommended differential pressure is 40 PSI (2.8 BAR). Consult Imo Pump for higher pressures.
IMO Inlet Pressure- 25PSIG (1.7BAR) maximum for pumps with single shaft extension. 50 PSIG (3.4 BAR) maximum for pumps with double shaft extensions.
IMO Viscosity- Type P and E: 100 to 25,000 SSU (20 to 5400 CST). Type B: 50 to 3000 SSU (8 to 650 CST). Consider cold startup conditions. Type H: 50 to 20,000 SSU (8 to 4300 CST).
Temperature- Type P: 0 to 400°F (-18 to 204°C). Type E: 0 to 500°F (-18 to 260°C). Type B: 0 to 180°F (-18 to 82°C). Type H: 0 to 250°F (-18 to 121°C)
IMO Drive- Direct only. Double extended shaft for through-drive optional. Magnetic Drive configurations also available.
IMO Rotation- Clockwise facing pump shaft . Counterclockwise optional, sizes 187 to 250.

Bơm IMO Series T324 is a double suction design for a compact, medium flow, medium pressure pump. It is used extensively for crude oil processing and transport as well as for fuel oil services(Nominal flow rate, GPM/LPM, at 700 PSI (48 BAR), 200 SSU (43 CST)
Bơm IMO Size: 400P, 400
Series T324 Specifications
IMO Casing- High shock capacity ductile (nodular) iron.
IMO Rotor Housing- Bronze standard, bimetal optional.
IMO Power Rotor- Alloy steel, hardened and thread ground.
IMO Idler Rotors- Alloy steel, hardened and thread ground.
IMO Gaskets- Cellulose and non-asbestos fiber.
IMO Seal & Bearing- Type B: Buna N bellows mechanical seal with carbon on niresist faces. Recommended for distillate oils. Type ZT: Positive drive mechanical seal with carbon on carbide faces. Recommended for residual and crude oils. All types have one external, permanently grease packed, deep groove ball bearing.
Accessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, etc.
IMO Outlet Pressure- 700 PSIG (48.3 BAR) maximum.
IMO Inlet Pressure- 65PSIG (4.5 BAR) maximum. Designs available to 400 PSIG (27.6 BAR). 50 PSIG (3.4 BAR) maximum for pumps with double shaft extensions.
IMO Viscosity- Type B: 33 to 3000 SSU (2.0 to 650 CST). Consider cold startup conditions. Type ZT: 33 to 20,000 SSU (2.0 to 4300 CST).
IMO Temperature- Type B: 0 to 180°F (-18 to 82°C). Type ZT: 0 to 250°F (-18 to 121°C)
IMO Drive- Direct only.
IMO Rotation- Clockwise facing pump shaft.
Mounting- Horizontal foot mount.
IMO Filtration- Inlet strainers are required to keep contaminants and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01 inch- 238 micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are recommended.
Maximum Speed*- 2300 RPM. Speeds above 1800 RPM require Imo Pump review

Để biết thêm thông tin về bơm IMO Việt Nam hãy liên hệ công ty CHÂU THIÊN CHÍ để được hỗ trợ tốt nhất về kỹ thuật, giao hàng nhanh và giá tốt nhất.
Địa chỉ: 29/33 Đường Số 11, Phường 11, Quận Gò Vấp, Tp.HCM
Website: chauthienchi.com- Email: [email protected] Hotline: 0909119181

Brand

IMO

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.